%20(1)-1000x1000w-36x36.jpg){kind=small}
-250x250w.png)
-250x250w.png)
S100 TG Micro case comes with one tempered glass panel on the left, one preinstalled 120mm standard fan at the rear and supports motherboards up to Micro-ATX.
S200 TG ARGB Mid Tower Chassis is an ATX case with a mesh front panel and comes with three preinstalled hydraulic bearing 120mm ARGB Lite front fans.
S370 WS Mid Tower Chassis is an ATX case featuring a mesh front panel with wood accents and comes with four CT120 PWM fans pre-installed, three at the front and one at the rear.
The TH360-S V3 ARGB Sync features a stylish square pump head with segment LCD display, along with a detachable top cover for orientation adjustment to match your build. The single-frame fan design achieves superior cable management for easy installation. Paired with high-performance ARGB fans reaching up to 2500 RPM, it delivers exceptional cooling performance.
The Tower 600 is an ATX case with a classic vertical case design and comes in an octagonal prism shape that is compatible with the latest hidden-connector motherboards. It supports up to a 420mm AIO radiator on the right side and a 360mm AIO radiator on the left side, and it can accommodate up to thirteen 120mm fans or nine 140mm fans. With a separately sold Chassis Stand Kit, users can enjoy a unique view with a special horizontal placement.
The Tower 600 is an ATX case with a classic vertical case design and comes in an octagonal prism shape that is compatible with the latest hidden-connector motherboards. It supports up to a 420mm AIO radiator on the right side and a 360mm AIO radiator on the left side, and it can accommodate up to thirteen 120mm fans or nine 140mm fans. With a separately sold Chassis Stand Kit, users can enjoy a unique view with a special horizontal placement.
TOUGHAIR 710 Black is constructed with a Dual-Tower Dual Fan Design for the latest Intel and AMD CPUs, allowing the two 140mm fans to perform the best possible cooling and kicking the TOUGHAIR series up a notch for the latest CPUs.
- 80 PLUS Gold certified, fully modular PSU, compatible with ATX 3.1 specifications, and equipped with a native 12V-2x6 connector.
- Max Output Capacity: 850W. This is a sweet-spot wattage, plenty of headroom for high-end gaming rigs featuring CPUs like the Intel Core i7/i9 or AMD Ryzen 7/9, paired with powerful GPUs
- Efficiency: 80 PLUS® Gold Certified (at 115Vac input). This means it converts power from your wall to your PC with high efficiency (typically around 90% under standard loads), saving energy and reducing excess heat.
- PFC (Power Factor Correction): Active PFC. It actively optimizes power distribution, reducing wave distortion and improving overall grid efficiency.
- PCIe 12+4pin (12VHPWR
- 80 PLUS Gold certified, fully modular PSU, compatible with ATX 3.1 specifications, and equipped with a native 12V-2x6 connector.
- Max Output Capacity: 1000W. This gives you massive headroom. It is ideal for top-tier setups featuring power-hungry components like an NVIDIA RTX 4090 (or next-gen 50-series equivalents) paired with an overclocked Intel i9 or AMD Ryzen 9 processor.
- Input Current: Bumped up to 15A-10A (compared to the 850W's 10A Max). It draws more current from your wall outlet under maximum load to deliver that 1000W of power safely.
- PCI-E 6+2pin Count: Increased to 5 cables (up from 4)
Max Output Capacity: 1200W. This enters the enthusiast/workstation tier. It provides immense overhead for heavily overclocked systems, dual-GPU setups, or high-end rendering workstations.
PCIe 12+4pin (12VHPWR / 12V-2x6). This is the headline feature. Having two native PCIe 5.0 12+4pin cables means this unit can comfortably power two modern high-end GPUs (like two RTX 4090s or next-gen workstation cards) simultaneously without relying on messy, unsafe adapters.
- ATX 3.1 Ready
- PCIe Gen 5.1 Ready
- TR2 S Series TRS-0650P-2 – 650W 80 PLUS® 230V Standard Certified APFC PSU
- Total Wattage: 650W. This is plenty of power for entry-level to mid-range gaming PCs (e.g., pairing a mainstream CPU with a GPU like an RTX 4060 or RX 7600).
- Graphics Card Support (PCI-E): It comes with two 6+2pin PCI-E connectors. This allows you to power a single graphics card that requires up to two 8-pin power connectors.
Wire AWG (16AWG): This is excellent. 16AWG is thicker and higher quality than the standard 18AWG found on many stock power supplies. Thicker wire means less resistance, lower heat generation, and cleaner power delivery to power-hungry modern graphics cards.
Cable Rated Current (7A) & 300V: Standard safety ratings ensuring the copper cores can easily sustain high power throughput.
Length (272mm / 345mm overall): At roughly 34.5 cm total length, this is an extension cable. You plug your power supply's existing PCIe cables into the female end of this extension, hide the junction in the back of your case, and route this clean, glowing cable to your GPU.
Cable Type (M/B 24Pin): This is the main power cable that plugs directly into your motherboard to power your CPU, chipset, and other vital components.
Wire AWG (18AWG): This is the standard, high-quality wire gauge used for PC power supplies. It is thick enough to handle the power load safely without overheating.
Cable Rated Current (7A): It is rated to safely handle up to 7 Amps of current.
Length (202mm / 285mm overall): At just under an energetic 30cm total, this is an extension cable, not a full replacement cable. You will plug your power supply's original 24-pin cable into one end of this, and plug the pretty, illuminated end into your motherboard.
Wire AWG (16AWG): This is excellent. 16AWG is thicker and higher quality than the standard 18AWG found on many stock power supplies. Thicker wire means less resistance, lower heat generation, and cleaner power delivery to power-hungry modern graphics cards.
Cable Rated Current (7A) & 300V: Standard safety ratings ensuring the copper cores can easily sustain high power throughput.
Length (272mm / 345mm overall): At roughly 34.5 cm total length, this is an extension cable. You plug your power supply's existing PCIe cables into the female end of this extension, hide the junction in the back of your case, and route this clean, glowing cable to your GPU.
The UX400 is a single-tower, single-fan CPU cooler designed with four 6mm U-shaped copper heat pipes and a 120mm high-airflow fan, delivering a cooling capacity of 240W TDP. Its hydraulic bearing enhances durability and ensures long-lasting performance. Additionally, the UX400 supports mainstream Intel and AMD sockets for broad compatibility.
Built for amazing viewing, the View 270 Plus TG ARGB Mid Tower Chassis is an ATX case that features tempered glass front and left panels, and comes with three Hydraulic Bearing 120mm ARGB Lite Fans pre-installed.
The View 380 XL TG ARGB Mid Tower Chassis is a dual-chamber ATX case with Hidden-Connector Motherboard support, four 120mm Hydraulic Bearing ARGB Lite fans, and space for a 360mm radiator at both the top and motherboard side.
-350x350.png "Thermaltake View 380 XL TG ARGB/Black/Win/SPCC/Tempered Glass*2/120mm ARGB Lite Fan*1+120mm ARGB Lite Reverse Fan*3/Brown Box")
The View 380 XL TG ARGB Mid Tower Chassis is a dual-chamber ATX case with Hidden-Connector Motherboard support, four 120mm Hydraulic Bearing ARGB Lite fans, and space for a 360mm radiator at both the top and motherboard side.
Specifications
CPU : RYZEN 5 5600
RAM : 16 GB DDR4
HDD : 512 GB NVME
GPU :
Specifications
CPU : Ryzen 5 9600x tray
RAM : 16 GB DDR5
HDD : 1 TB NVME
GPU : 5060ti
%20Flow%20RGB%20Edition%20ATX%20Mid%20Tower%20Chassis%20Black%20Color/1-350x350.png "Vesta Gaming PC")
Specifications
CPU : Ryzen 7 7800X3D AM5 TRAY
RAM : 32 GB DDR5
HDD : 1 TB NVME
GPU : RTX 5060